Skip to content

Philips Hue Hardwired

    November 18, 2022

    I installed my Philips hue lights and they are awesome

    I installed my Philips hue lights and they are awesome. The colors are so vibrant and the light is so bright. I can’t believe I waited so long to get them.

    Why I decided to go with hardwired

    I’ve been using Philips Hue for a while now and I absolutely love it. The convenience of being able to control my lights with my phone is amazing. I was using the Hue bridge that came with the starter kit, but it was starting to act up so I decided to look into getting a new one. That’s when I found out that Philips now offers a hardwired bridge.

    I did some research and found that the hardwired bridge is more reliable than the wireless one. It also doesn’t need to be plugged into power, which is great because I don’t have a lot of outlets in my house. The only downside is that it’s a little more expensive. But after dealing with my Hue lights going out constantly, I decided it was worth it to spend a little extra to get a more reliable system.

    I’m really happy with my decision to switch to the hardwired bridge. It was easy to install and my lights have been working great since. If you’re considering switching to hardwired, I would definitely recommend it.

    How I did it

    I’m not an electrician, but I’m pretty handy around the house. When I decided to install hardwired Philips Hue lights in my home, I knew it would be a bit of a challenge. But I’m always up for a good DIY project, so I went for it.

    First, I did some research to figure out exactly what I needed to do. I quickly realized that I needed to install a low-voltage power supply and some sort of bridge in order to connect my Philips Hue lights to my home’s electrical system. I also needed to purchase some special Philips Hue light bulbs.

    Once I had all of the supplies, I started by installing the power supply. This was actually pretty easy. I just had to follow the instructions that came with the power supply.

    Next, I installed the bridge. This was a little more challenging, but I was able to do it with the help of some online tutorials.

    Finally, I installed the light bulbs and connected them to the bridge. Once everything was connected, I was able to control my new hardwired Philips Hue lights using my smartphone.

    Overall, I’m really happy with the results. My hardwired Philips Hue lights look great and they work perfectly. And I’m proud to say that I installed them all by myself!

    What I needed

    I needed a way to have my hue lights turn on and off automatically, without having to rely on my phone or the Hue app. I also wanted something that would work with my existing home automation setup, so I could use my voice assistant to turn the lights on and off, or set them to a schedule.

    What I found
    I found that the Philips Hue hardwired switch was the perfect solution for my needs. It is easy to install, works with my existing home automation setup, and allows me to control my lights with my voice assistant.

    Why it works
    The switch is easy to install, and it works with my existing home automation setup. It also allows me to control my lights with my voice assistant.

    Tips for others

    If you are looking to hardwire your Philips Hue lights, there are a few things you should keep in mind. First, make sure you have the right tools and materials. You will need a screwdriver, wire cutters, and electrical tape. You will also need to know which wires to connect. The Philips Hue Bridge has two wires: a power wire and a ground wire. You will need to connect the power wire to the positive terminal on your light fixture, and the ground wire to the negative terminal.

    Once you have all of the necessary materials, you can begin hardwiring your Philips Hue lights. First, turn off the power to your light fixture at the breaker box. Next, remove the light fixture’s cover plate. Once the cover plate is removed, you will be able to see the wires. Using your wire cutters, cut the wires that are connecting the light fixture to the power source.

    Now, you can begin connecting the Philips Hue wires to the light fixture. Connect the power wire to the positive terminal, and the ground wire to the negative terminal. Once the wires are connected, you can tape them together using electrical tape. Finally, replace the light fixture’s cover plate and turn the power back on at the breaker box.

    Leave a Reply

    Your email address will not be published. Required fields are marked *