Skip to content

How to Program Xfinity Voice Remote

    November 23, 2022

    How to program xfinity voice remote

    If you have an Xfinity voice remote, you can program it to control your TV and home theater system. To do this, you’ll need to know the codes for your devices.

    To find the codes for your TV and other devices, go to the Xfinity Remote Control Code Lookup website. Enter the manufacturer and model number of your device, and the website will provide you with a list of codes.

    Once you have the codes for your devices, you can program your Xfinity voice remote. To do this, press and hold the Setup button on the remote until the TV button blinks twice. Then, enter the code for your TV. The TV button will blink twice again to confirm that the code was accepted.

    You can repeat this process to program the Xfinity voice remote to control your other devices.

    Introduction

    If you want to program your Xfinity Voice remote, there are a few simple steps you need to follow. First, find the model number of your remote. You can usually find this on the back or bottom of the remote. Once you have the model number, you will need to find the code list for your specific remote.

    There are a few different ways to program your remote, depending on the model number. If you have a DVR or HD receiver, you will need to use the on-screen menu. For other models, you can use the buttons on the remote itself.

    To program your remote using the on-screen menu:

    1.Press the Menu button on your remote.

    2.Select Settings.

    3.Select Remote Control.

    4.Select Program Remote.

    5.Follow the on-screen instructions.

    To program your remote using the buttons:

    1.Press and hold theSetup buttonuntil the light at the top of the remote turns green.

    2.Enter the code for your TV or audio device.

    3.Press and hold the Mute and Select buttons simultaneously until the light at the top of the remote turns green.

    4.Point the remote at your TV or audio device and press the Power button.

    5.If the device turns off, you have successfully programmed the remote. If not, repeat steps 2-5.

    Leave a Reply

    Your email address will not be published. Required fields are marked *