Skip to content

How to Install Philips Hue Light Strip

    November 17, 2022

    Determine where you would like to place your Philips Hue light strip.

    If you are installing your Philips Hue light strip for the first time, we recommend doing a dry run first. This will allow you to test the placement of the strip and make any necessary adjustments before adhesive backing is applied.

    To do a dry run, simply hold the light strip in the desired location and mark the spot where the strip will be adhered with a piece of tape. Once you have determined the placement, remove the strip and peel off the adhesive backing. Then, re-apply the strip to the marked spot and plug it in to make sure the strip turns on.

    Once you are happy with the placement, it is time to install the strip for good. Begin by peeling off the adhesive backing and applying the strip to the marked spot. Then, plug in the strip and use the Philips Hue app to finish the installation process.

    Clean the surface where you will be placing the light strip.

    Use the included adhesive strips to attach the light strip to the surface.

    Plug the light strip into the Hue Bridge.

    Download the Philips Hue app and follow the instructions to set up your new light strip.

    Remove the adhesive backing from the light strip.

    Using the Philips Hue light strip is a great way to add some ambiance to your home. The process of installation is simple and does not require any special tools. Start by removing the adhesive backing from the light strip. Next, find a place to install the strip. Make sure the surface is clean and free of debris. Once you have found the perfect spot, peel off the adhesive backing and stick the strip in place. If you need to cut the strip to size, use a sharp pair of scissors. Finally, connect the strip to your power source and enjoy the new look of your home.

    Place the light strip on the desired surface.

    If you want to install your Philips Hue light strip so that it’s flush against the surface, you’ll need to first attach the adhesive strip to the back of the light strip. Once the adhesive strip is in place, simply peel off the backing and press the light strip firmly against the surface. If you want a bit of extra security, you can use the included mounting brackets to screw the light strip into place.

    Now that the light strip is installed, it’s time to connect it to your Philips Hue bridge. To do this, simply plug the light strip into the included power supply and then use the included Ethernet cable to connect the power supply to your Hue bridge. Once the light strip is connected to your bridge, you’ll be able to control it using the Philips Hue app.

    Press the light strip down firmly to ensure that it is properly adhered.

    To install your Philips Hue light strip, simply press it down firmly to ensure that it is properly adhered. That’s all there is to it! Enjoy your new, beautifully lit space.

    Plug the light strip into a power outlet.

    To install your Philips Hue light strip, simply plug it into a power outlet. That’s all there is to it! Once it’s plugged in, you can use the Philips Hue app to control your light strip, change its color, and set up schedules.

    Use the Philips Hue app to control your light strip.

    To install your Philips Hue light strip, start by downloading the Philips Hue app. Once the app is downloaded, open it and follow the instructions to create an account. Once you have an account, you can add your light strip to the app. To do this, tap the “Add Lights” button and then select “Add Light Strip.” Follow the instructions in the app to complete the installation.

    Once your light strip is installed, you can use the app to control it. To do this, tap the “Lights” button and then select the light strip you want to control. You can then use the controls in the app to change the color, brightness, and other settings of the light strip.

    Leave a Reply

    Your email address will not be published. Required fields are marked *